ML530 Manual Version 1.0 Page 12 ©1999 Euphonix, Inc.
User Reference
ML530 Mic/Line Interface Cable Specification – Standard Configuration
The standard lengths specified below are supplied so that the monitor interface can be located in the control room.
Custom lengths are available. Cable kits must be ordered separately.
Cable Qty Description 10M Part # 20M Part#
Length
Accessory cable kits by special order
936-07083-01 936-07155-01
1 (1)
MADI Output (RG59 75 ohm coax) 032-07230-00 032-07306-00
2 (1)
AES/EBU Sync (1xXLRM<>1xXLRF) 030-07085-01 030-07153-01
3 (1)
TCC Control from 253i Interface Pilot 030-06983-01 030-06985-01
4 (2)
ML530 Analog out (EM38x1<>XLRFx12) 030-7108-01
.5M
5 (2)
Elco 38 Pin Connector w/hood 100-02099-00
NA
6 (80)
Elco Crimp Pins 100-02100-00
NA
4
21
B
recommended locations
3
AM713
ADigital Core
B
Use relative locations to
determine cable lengths
4
ML530
Control Room
B
Machine Room
A
Elco crimp pins and hoods for
user inputs are supplied in
accessory cable kits. Input
cabling supplied by customer
5,6
1 2
44
To Next Page
Loading...
Need help?
General