ML530 Manual Version 1.0 Page 14 ©1999 Euphonix, Inc.
ML530 Mic-Line Interface Cable Specification – Optional Input Patch
Patchbay, cables, pins and connectors are ordered separately as required. *
Part Qty Description Part # Length
A (1)
Tie Line Patch 950-03770-01
NA
B* (2)
Elco 38 Pin Connector w/hood 100-02099-00
NA
C* (80)
Elco Crimp Pins
100-02100-00
NA
D** (2)
ML530 analog out (EM38x1<>EM38x1
030-07158-01
2M
*Elco hoods and crimp pins are included in standard 10M and 20M accessory cable kits.
**10M cable available, EM38x1<>EM38x1, part# 030-06913-01
5 5
4
21
B
recommended locations
3
AM713
ADigital Core
B
Mic-Line Input Patch
4
ML530
Note: The patchbay in the patch option has
the capacity to provide input patch to 48
channels or two ML530 Interfaces. An
additional set of cable D is required for the
second ML530 interface.
Input cabling supplied
by customer
DD
A
C,D
To Next Page
Loading...
