16
Before making the connection
• Check that the switch, wiring and electrical system
can support the appliance load (see data plate);
• Check the power supply system has an ecient earthing
connection which complies with the provisions of current regulations;
• Check the power outlet or omnipoar circuit-breaker is
easily accessible once the cooker has been installed.
INSTALLATION
Replacing the power supply lead
• If the supply cord or plug is damaged, it must be replaced by the manufacturer
or its service agent or a similarly qualified person in order to avoid hazard.
Warning! All electrical connections must be made by a suitably
qualified and licenced person in accordance with local regulations.
Glen Dimplex will not be held responsible for damages caused to
cabinetry due to incorrect installation.
To Next Page
Loading...
