Need help?Do you have a question about the Europlex Verifier 24 and is the answer not in the manual?
General| Brand | Europlex |
|---|---|
| Model | Verifier 24 |
| Category | Control Panel |
| Language | English |
Describes the manual's purpose, intended audience, and structure.
Outlines the core capabilities and operational modes of the Verifier system.
Details the fundamental wiring and setup for the control panel.
Identifies components and connections on the main control panel circuit board.
Provides dimensions and mounting details for the control panel enclosure.
Explains the procedures for connecting primary and backup power sources.
Details the features, interface, and status indicators of the remote keypad.
Provides step-by-step guidance for physically installing the RKD unit.
Explains how to configure RKD addresses using DIP switches.
Describes how to adjust the contrast for the RKD's LCD display.
Covers best practices for cabling, regulations, and device placement.
Specifies the recommended operating temperature and humidity ranges.
A checklist to ensure all installation points have been adhered to.
Explains commercial, domestic, and block system configurations.
Details the configuration of a 2-block system for the Verifier 24.
Details the configuration of a 4-block system for the Verifier 64.
Describes setting up the system for dual tenants or separate areas.
Guidelines for powering Line Encoder Modules (LEMs) and I/O Modules.
Explains the wiring procedure for connecting zone inputs.
Visual representation of how modules connect for system expansion.
Details the function, connection, and types of LEMs.
Specific details on the A-LEM input module.
Specific details on the C-LEM output module.
Instructions for coding addresses for LEM and C-LEM modules.
Description of the Input/Output module's features and components.
Procedure for programming zones on the I/O module.
Procedure for programming outputs on the I/O module.
Explains how the I/O module reports fault conditions.
Guides on troubleshooting common issues with the I/O module.
Initial system power-up, cold start, and zone count verification.
Overview of the engineer menu structure and navigation.
Configuration of system time, name, and operational type.
Details on setting automatic timed events for the Verifier 64.
Procedure for assigning zones to split or block system configurations.
Defining zone types, attributes, and descriptions.
Setting various timing parameters for system operations.
Programming and configuring system outputs and their types.
Configuring serial port settings for peripheral devices.
Accessing diagnostic tools for system interrogation.
Procedure for testing zone activation and system response.
Analyzing the status and resistance of individual zones.
Testing the functionality and state of system outputs.
Viewing the current status of all active zones.
Monitoring troublesome zones by making them non-reporting.
Configuring system variables for specific operational behaviors.
Further variable settings including Duress, Modem, and Retrigger.
Procedure for changing the engineer access code.
Guide to entering text and using the system's word library.
Continued instructions for text entry and word library access.
Overview of the user menu structure and available options.
Allows users to temporarily disable specific zones.
Accesses the system event log for user activity and alarms.
Activates all internal and external sounders for testing purposes.
Procedure for setting the system's internal clock.
Master user function to add, modify, or remove system users.
Further options for user setup including name and options assignment.
User management including removing users and changing codes.
Allows users to change their personal access code.
Initiates remote communication with the panel.
Disarms the system and clears alert messages.
Sets the system to perimeter protection mode for domestic use.
Sets the system to night-time protection mode.
Procedure for arming individual blocks within a block system.
Procedure for disarming individual blocks within a block system.
Arms the entire system for maximum security when unoccupied.
Explains the various zone configurations for domestic and commercial use.
Details additional zone types such as E.Term, Fire, F.Exit, and Line.
Describes zone types: Keyarm, Medic, P.A., Tamper, and Tech.
Explains modifiers that alter the behavior of default zone types.
Illustrates how system modes affect the operation of zone types.
Describes the function and types of the system's on-board outputs.
Instructions for connecting a serial printer to the Verifier 24.
Details the connection and programming of the DM1200 communicator.
Explains the connection procedure for the Eurocom 400 communicator.
How to connect the Verifier panel to a PC via serial port for programming.
Overview of the engineer's service tool for data management and transfer.
To Next Page