APOLLO Windows XP Embedded Quickstart Security and image duplication
© 2007 Eurotech Ltd Issue E 48
Customising the Standard XPe image supplied to create a master image
The Standard XPe image supplied on the flash disk cannot be used as a base image
for duplication, as the image has already been sealed for production purposes.
If you wish to customise the Standard XPe image, you must install the nonsealed
version of the image, included on the DVD. This can be done in the same way as
described in
Reinstalling the supplied Windows XP Embedded image, page 29, using
the image file from the NONSEALED folder, instead of the SEALED folder.
This image has been created using the steps described for the duplication of Windows
XP Embedded images (see
Creating the master copy (resealing the image), page 43)
but fbreseal has not been run. This allows you to make any customisations to the
image before running fbreseal, and thus creating your own master image.
Do not use the NONSEALED image for anything other than creating a master
image. If more than one NONSEALED image is connected on the same
network, problems will occur because they have the same SID and network
name.
For general use, use the SEALED version of the image.
To Next Page
Loading...
