APOLLO Windows XP Embedded Quickstart Getting started
© 2007 Eurotech Ltd Issue E 8
Getting started
What’s in the kit?
Eurotech Ltd’s APOLLO Windows XP Embedded basic kit comprises the following
items:
• APOLLO processor board (fitted with Gigabit Ethernet):
- 1.6GHz Intel Pentium M CPU.
- 512MB PC2700 DDR RAM.
• Low profile 180W Flex ATX power supply (100V - 240V AC Input).
• 2GB Intel USB Flash Disk module pre-loaded with Windows XP Embedded SP2.
• US, UK or European power cord.
• 2m RS-232 Null modem cable.
• Breakout cable for GPIO header (with un-terminated wires).
• Ultra-ATA -100 IDE cable (80 conductors).
• 1 x serial adapter cable for COM3 and COM4 (RS-232 ports).
• 1 x serial adapter cable for COM4 (RS-422/485).
• 2m CAT-5e cross-over Ethernet cable (suitable for Gigabit Ethernet).
• SPDIF (Sony/Philips Digital Interface) optical cable assembly for high quality audio
channels.
• APOLLO Windows XP Embedded Development Kit DVD.
• APOLLO interface board for power control switch, reset button, activity indicators,
USB and Firewire (IEEE1394) ports - supplied with interconnecting cables.
• 256MB USB Flash Disk.
The following items are also included with the flat panel kit:
• AUO 15" Colour XGA 1024 x 768 pixel TFT flat panel display.
• Backlight Inverter module (including 1m connecting cable).
• 1m LVDS flat panel adapter cable for APOLLO.
• 1m serial cable for touchscreen interface.
• 15" 8 wire analogue touchscreen.
• Eurotech Ltd TSC1 touchscreen controller module.
To Next Page
Loading...
