EVAstream Mounting - Installation EVAstream Mounting - Installationwww.evaoptic.com28 29
6 Create the best swimming zone
The customer’s swimming experience fully depends on the correct placement of the turbine. By
placing the turbine at exactly the right height, you ensure that the current reaches the swimmer’s
chest.
1. Determine swimming zone
You start by determining the swimming zone of the user. Did he or she choose an EVAstream Fit, Pro
or Max? Then you can use the images to determine exactly what the user’s swimming zone is. This is
always the same per type, regardless of the height of the swimmer.
distance
EVAstream FIT EVAstream PRO EVAstream MAX
Swim zone
max. swim speed in zone
1:45s / 100m*
*Measurements adult proesional swimmer. Body size and mass aect swim speed
Swim zone
max. swim speed in zone
1:10s / 100m*
Swim zone
max. swim speed in zone
0:55s / 100m*
2. Turbine placement EVAstream 250 mm
For the positioning of the turbine we advise 250 milimeters (centre of the turbine) below water level. Mount
the EVAstream horizontally in the wall, in the middle of the wall.
3. Check the swimming zone
The flow is directed at the torso and not at the head, so that there is free breathing space while
swimming. The current is also wide and stable enough to encompass the entire body. When you swim
over the water flow, or you get water in your face, the turbine has to be adjusted.
4. Adjust the turbine if necessary
You can adjust the turbine a little higher or lower with the adjustment jig at the customer’s request. The
turbine can be adjusted a maximum of 2 degrees downwards or 3 degrees upwards using adjusting bolts on
the side. This way you ensure that every customer has an optimal swimming experience.
To Next Page
Loading...
