EVA EVAstream - How EVAstream workouts are structured; Start with the Swim Test

EVAstream Mounting - Installation EVAstream Mounting - Installationwww.evaoptic.com6 7
4 Symmetrical placement EVAstream
The importance of symmetrical placement of the EVAstream
To create the optimal swimming experience for the customer, it is important to think carefully about the
positioning of the EVAstream in the design phase, for example in relation to elements such as stairs and
platforms. Such ‘obstacles’ can cause a less pleasant swimming experience. For optimal water flow, the
EVAstream should be placed in the middle of the pool wall in a symmetrically designed pool.
Blockages in the water circulation
Suppose you have placed a staircase in the corner of
the pool. As a result, the circulation of the flow is not
equal on both sides of the pool, because the stair-
case influences the flow. The flow of the EVAstream
is still just as powerful, but the user experiences the
current as if it were faltering.
Flow with asymmetrical placement
When a turbine is not placed symmetrically in the
pool, the circulation of the current is not equal on
both sides of the pool. The current of the EVAstream
is still just as powerful, but it creates a kind of vortex
in the middle of the pool.
3.3 General specifications
EVAstream
EVA Piezo
DMX
Power input 230 VAC; 10A
Cable motor 5 m, 16 mm2
Extend with max. 20 m using 25 mm2 cable
(Flexible cable of fine copper wire strands)
Cable 10m 7-wired aqua cable
Optional: 30m 7-wired aqua cable
Cable 2 wires > 0.22 mm2 + shield 110 Ohm