EVAstream Mounting - Installation EVAstream Mounting - Installationwww.evaoptic.com8 9
5 Mounting the EVAstream
1. EVAstream turbine
Water suction takes place through the grids
around the machine. Always make sure that the
suction parts are completely free of obstacles.
These parts of the machine must not be closed or
blocked in any way (EN 13451-1/3).
For instructions on how to mount the turbine, go to
5.4.
2. Motor Contol Unit
The motor control unit (MCU) of the EVAstream is
placed in the technical area near the pool (a dry
and condensation-free environment, zone 2).
Ensure that the MCU is placed with the cable
glands facing down.
3. EVA Piezo
Start/stop or adjust the speed of your EVAstream
swimming workout at the touch of a button, right
from the pool.
For instructions on how to mount the EVA Piezo, go
to 5.3.
4. ON/OFF switch
If the EVAstream is permanently connected to
230V mains, the installation must additionally be
equipped with an on/off switch mounted near the
swimming pool where the EVAstream is located.
5. EVA Experience web app
Use the EVA Experience web app to manage the
EVAstream.
For instructions on how to set up the tablet en-
vironment, please refer to the manual Eletrical
connections & PCB settings
1
2
3
4
5
To Next Page
Loading...
