EVA ROYAL - Using the Machine; Changing the Presser Foot

13
Using the machine
Handwheel
The handwheel turns
counterclockwise.
Presser foot lifter
To raise the presser foot, raise
the
lever on the rear of the
machine
until it engages.
Changing the presser foot
-Switch the machine off " 0" .
-Raise the presser foot.
Press the catch (A) <to release the
presser foot from the
clamp.
Raise the presser foot lifter to the
highest position and remove the
presser foot
sale to the left.
To attach the presser foot sale,
place
it under the shaft-The
groove in the shaft should line up
exactly with the presser foot pin.
Lower the shank and the presser
foot
will engage automatica!ly.