EVA ROYAL - Threading; Threading; Preparation; Upper Looper (Green)

CD
17
Threading
Threading / Preparation
- Disconnect machine from
electricity supply.
- Support rod with threCld gUide
must be fully raised.
-
Open the looper cover and the
clo
th plate cover .
- Tu
rn the han dwheel towards vou
until needles are fully raised.
-
Thread the machine in the
correct sequence .
Upper looper (Green)
- Place the spool on the spool holder
pin ~
- Bring thread up from back to front
through guide
(1).
- Make s-loop through holes in thre,
guide bar (2).
- Thread guide
(3,4,5)
- Thread looper eye (6)
- For Certain models only
- Pour un certain modeles uniqueIIl€
- Kun for visse modeller
- Nur fUr gewisse Modelle