EVA ROYAL - Auto Switch off

(A)
(C )
(8 )
33
Threading
AUTOMATIC LOWER LOOPER
THREADER (FOR CERTAIN TYPE ONLY)
l.passing the thread through
the hole on lower looper
thread guide (5)
•
2. Turn the balance wheel
toward you until the lower
looper
extending out
5-10mm from the needle
piate edge.
3.Pull the thread
with tweezers to pass the
lower looper hole(A).
4.Draw the
therad with your
left
hand tightly.
5.Use your finger to push the
automatic threader(8) up to
the topmost,
and then
thread goes through the
lower looper(C)
automatically.
CE:Security
"auto switch off"
(FOR CERTAIN TYPE ONLY)
when you open the panel
infront of
the loopers the
machine stops automatically
-FINGERPROTECHTION.