EasyManua.ls Logo

evapolar evaLIGHTplus EV-1500 - TROUBLESHOOTING; Common Problems and Solutions; Technical Support Contact

evapolar evaLIGHTplus EV-1500
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SOLUTION: Pour a full tank of clean, distilled water and let the device
completely dry out (this may take several times to remove the smell
completely)
PROBLEM: There is water near the device
POSSIBLE CAUSE: Should be reviewed properly with a support
team specialist, please, contact us for assistance via the link below
TECHNICAL SUPPORT
PROBLEM: Cold air does not come out of the device despite the
fact the cartridge is wet
POSSIBLE CAUSE 1: Humidity level over 70%
SOLUTION: Ventilate the room
POSSIBLE CAUSE 2: The cartridge has expired
SOLUTION: Replace the cartridge
PROBLEM: Cold air does not come out of the device and the cart-
ridge seems to be dry despite the fact the water tank is full
SOLUTION: Since there can be different reasons for that, please,
contact our support team
PROBLEM: The airflow strength indicator (dashed ring on the screen)
blinks, the airflow rate decreases
POSSIBLE CAUSE: The device does not receive enough power
SOLUTION: Ensure the power source for your evaLIGHTplus meets
the 2A 5V requirement. Please, contact our support team if that didn’t
help
PROBLEM: The device suddenly started emitting an unpleasant
odor
POSSIBLE CAUSE: Impurities in water or air absorbed by the filter
TROUBLESHOOTING
17 18

Related product manuals