1. Disconnect the device from the power source.
2. Remove the reservoir by sliding it up.
3. Use both hands to lift the upper part of the body. Push on both
sides of its base to release the locks and then slide it upwards.
4. Unlock and move the control unit upward and to the side.
5. Take out the old cartridge by lifting it up.
6. Place a new cartridge in place of the old one.
7. Put the device back together. Make sure the control unit is
locked in its place and the housing top fits in the slots.
8. The device is ready to use.
Depending on usage and storage, the cartridge can last up to 3-6
months. Poor water quality reduces the lifespan of the cartridge.
WARNING!
When choosing a new cartridge for your evaLIGHT plus, be careful:
you need a cartridge forev-1500 model; the cartridge for ev-1000
(evaLIGHT, the old model) is incompatible with your device.
REPLACING THE CARTRIDGE
13 14
1. 2. 3.
4.
8.
5. 6.
CHANGE EVERY
3-6 MONTHS
7.
To Next Page
Loading...
