108 109
Position 3
Squeeze both
handle releases and
move the handle to
Position 3.
2
Installing Carrier WITHOUT Base in Aircraft Installing Carrier WITHOUT Base in Aircraft
(cont.)
Place the child
restraint on the
aircraft seat
rear-facing, as
shown above.
Aircraft
Seat Belt
1
IMPORTANT
You must use the internal harness when installing the
child restraint in aircraft.
Before installing the child restraint, make sure the
aircraft seat is in a fully upright position.
DO NOT use the convenience base when installing
child restraint in aircraft.
PLACE AT ARMPIT LEVEL
SENSOR
SAFE
Route the aircraft seat belt through the belt slots on
the carrier, as shown above.
3