25
1
Placing the Carrier in the Base
Tilt front feet of infant car seat down so that front
edge goes below hook on base (see image) and
allows seat to rotate down. Plungers will disappear
into the base and reappear in windows when
locked.
NOTE: Ensure Adjuster strap is inside the child
restraint before placing front edge of seat under
base hook.
The carrier MUST be locked rmly into the base. Check
by lifting up on the back (head end) of the seat to make
sure it is locked in place.
WARNING!
DEATH or SERIOUS
INJURY can occur.
IMPORTANT: Plungers
must be visible through
windows to ensure that seat
is securely installed.
2
With the infant car seat installed, check that the
base is still level with the ground.
Hook
Front of Carrier
UNDER Hook
To Next Page
Loading...
