Evenflo NurtureMax - Removing the Seat Cover; Step 1: Disconnecting Canopy from Seat Pad; Step 2: Unhooking Rear Connectors; Step 3: Pulling Fabric Slots from Tabs

48
Removing the Seat Cover
1
2
3
4
Disconnect Canopy
from seat pad using
hook and loop
connector at rear of
infant car seat.
At rear of seat, unhook
three hook connectors
from seat shell.
Pull the two fabric
slots from tabs near
the handle. Repeat on
other side of infant
car seat.
At the front of the seat,
unhook the two elastic
loops from the tabs.