Evenflo NurtureMax - Changing the Waist Strap Position (Continued); Step 3: Unhooking and Moving Waist Strap Anchor; Step 4: Inserting Waist Strap Anchor into Inner Slot

43
Changing the Waist Strap Position
3
Unhook the front of the child restraint’s seat pad
and move it out of the way to expose the waist
strap slots and anchors.
Remove the waist strap anchor from the outer slot
on bottom of the seat, and push the anchor up
through the slot to the top of the seat. Repeat for
other side.
Push the anchor down through the appropriate
inner slot to the bottom of the seat then feed it
through the outer slot to the top of the seat and
repeat for other side.
NOTE: See chart on page 42 to nd the appropriate
waist strap slots for your child’s size.
4