Evenflo Secure Kid - Converting into a Booster Seat

38 39
2. Remove both
harness straps from
the splitter plate
and pull them
through to the
front of the seat.
Converting into a Booster Seat
1. Loosen harness .
Press the harness release
button while pulling
outward on the harness
straps, as shown.
Disconnect the chest clip.
3. Disconnect all
J-clips and all
retaining strips,
then remove the
seat pad.
Using as a Booster Seat
Converting into a Booster Seat
4. Route the harness
straps through
adjustment slots,
then attach to
splitter plate .
5. Tuck the chest clip
and buckle tongues
into the recesses on
either side of the
seat shell .
IMPORTANT: Make sure
both harness straps are
installed completely on the
splitter plate.