Evenflo Snugli - Harness Position Adjustment Steps; Repositioning Harness Straps

37
4
Insert both harness
straps A into the new
harness position slots.
A
5
6
Attach the appropriate
pocket on the harness
straps A (according to
your child’s size) to the
splitter plate E.
IMPORTANT: Make sure
both harness straps are
installed completely on the
splitter plate, as shown.
Tighten the harness straps by pulling the adjustment
strap F on front of the restraint.
Note: Final adjustment of the harness straps must be
completed with the baby in the child restraint.
F
A
E