Evenflo Snugli - Using the Locking Clip; Locking Clip Installation

41
Locking Clip
Remove locking clip from vehicle seat belt when
not used with a child restraint, or the vehicle seat
belt will not properly restrain an adult or child.
Serious injury could occur.
WARNING
To watch a video about installing a locking clip, go to
www.evenflo.com.
Push down
on the base using
your foot or
knee.
Remove the locking clip A from the slot in your
convenience base.
Thread the seat belt through the base openings B
for the vehicle belt path, and buckle the seat belt.
Pull the shoulder belt C tightly to remove all slack
from the lap portion D of the belt.
C
Using the Locking Clip
1
Tip!
Tip!
A
B
D
•Lap/shoulderseatbelt
combinations that have a
buckle tongue that slides
freely along the belt
without locking into
place; OR
Use the locking clip with:
• Seat belts equipped with an emergency locking
retractor (ELR). Some ELR vehicle belts can be
switched so that they lock when tightened. It may
not be necessary to use a locking clip in these
situations.
Consult your vehicle
owner’s manual before
installing the locking
clip.
Ö