Evenflo Snugli - Locking Clip Installation Steps; Securing Seat Belt with Clip

42
13 mm (0.5 in.)
While holding the belts and
buckle tongue E, thread
the locking clip A onto the
seat belt and slide it into
place.
Note: Locking clip must
be placed within 13 mm
(0.5 inch) of seat belt
buckle.
3
A
A
E
Hold the lap/shoulder belts together just behind
the free sliding buckle tongue E and unfasten the
seat belt.
2
4
A
E
Buckle the seat belt with
the locking clip A in
place.
• Ifinstallingtheconvenience base with a vehicle seat
belt, return to page 24, Step 3.
• Ifinstallingthecarrier (no convenience base) with a
vehicle seat belt, return to page 31, Step 4.