Evenflo Snugli - Changing Harness Position; Adjusting Harness Slot Height

36
Changing the Harness Position
As your child grows, you will need to change the harness
strap position so they are routed through the slots
closest to the child’s shoulders. The shoulder harness
straps should ALWAYS be as close as possible to, but
NEVER above the child’s shoulders.
1
Loosen the harness
straps A by pressing
the harness release
button B while
pulling on the straps.
2
3
C
D
Pull both harness straps A
through the front of the
child restraint.
There are two positions
on the harness straps.
The top loop C is for
newborn use. The bottom
pocket D is for use as
your child grows.
Slide the harness strap off
of the splitter plate E.
E
A
A
B