WiFi Setup!
To set up Wi-Fi for the Genesis, press “Wi-Fi Setup” and the controller will scan for nearby
networks. Select your desired network and enter the password (if required) and press “Save”.!
***For security reasons, we highly recommend that the user place all controllers into a
separate logical network or VLAN, separate from other networks, routers, and hardware.
Update Firmware!
If your controller is connected to the internet through the WiFi module, by pressing
Download Firmware, you will connect to www.bartinst.com to see if any updates are available.
Once it has found the firmware, you have the option to update your controller. Updating
firmware will NOT affect the firing programs.!
Reset WiFi!
Press Reset WiFi when having trouble with the WiFi connection. The controller will reset the
WiFi connection and attempt to reconnect to your currently saved connection. !
Manual WiFi Setup!
Used to manually set up a WiFi network that is hidden or otherwise not found when running
WiFi Setup. Enter the network name under SSID and press “Save”. Under password, enter the
network password at press “Save”.!
Advanced WiFi!
Used for network administrators this information can be used when firewall settings need
adjusted to allow the controller to communicate with the KilnAid app.!
To Next Page
Loading...
