EverFocus EZN3261 - Installation Guide; Basic Installation Procedures

EZN3261/3361
5
4. Installation
4.1 Packing List
Please check that there is no missing item in the package before installing.
•
EZN Series Camera x 1 •
4-Pin Terminal Block x 1
•
Quick Mounting Ring x 1 •
Test-Out Cable x 1
•
RJ-45 Connector x 1 •
Software CD x 1
•
Desiccant Bag x 1 •
Quick Installation Guide x 1
•
Mounting Kit x 1
- Long Screw x 4 (for attaching the Quick Mounting Ring to the mounting surface)
- Short Screw x 4 (for connecting the Camera Base to the Quick Mount Ring)
- Screw Anchor x 4 (in conjunction with Long Screw)
- Hexagon Key x 1 (for adjusting the camera position)
- Hexagon Wrench x 1 (for screwing the set screw)
- Plug x 1 (inserting to the Quick Mounting Ring for through-the-wall installation)
Note:
1. Equipment configurations and supplied accessories vary by country. Please consult your local
EverFocus office or agents for more information. Please also keep the shipping carton for possible
future use.
2. Contact the shipper if any items appear to have been damaged in the shipping process.