EZN3261/3361
51
• Night mode without IR LED: Select to keep the camera in Night mode (black and white images
with IR LED off), even in daytime.
• Schedule without IR LED: Select to let the camera to switch to Day mode or Night mode (IR
LED off) based on the day and night schedule settings (see 7.2.4 Schedule).
D/N Level: This function can only be activated if you select Auto / Auto mode without IR LED
mode in the Day/Night Settings field. Adjust the level (1-4 lux) for the camera to switch from
Day mode to Night mode based on the light level detected by the Light Sensor. The camera will
switch back from Night mode to Day mode when the detected light level has reached 2-level
higher than the level you have set up.
For example:
If you set up the D/N level to 1 (lux), the camera will automatically switch from:
• Day to Night when the light level is below 1 lux.
• Night to Day when the light level has reached 3 lux.
If you set up the D/N level to 2 (lux), the camera will automatically switch from:
• Day to Night when the light level is below 2 lux.
• Night to Day when the light level has reached 4 lux.
Click Apply to apply the changes or Cancel to cancel the changes and return to the previous settings.
Day Profile/ Night Profile: Select Day Profile to configure the following settings for daytime and select
Night Profile to configure the following settings for nighttime. Click the Apply button to save the
settings.
Note: Some settings in the Exposure Settings / Features may be grayed-out. To configure all the
settings, select User Define from the Day Mode / Night Mode drop-down list (see 7.2.2 Profile).
【Lens Settings】Click Apply to apply the changes or Cancel to cancel the changes and return to the
previous settings.
Focus Mode: Select Manual to manually adjust the focus or select Auto to enable the Focus
button on the live view window (see 5.4 Live View Window). Note that if you select Auto, the
camera will automatically adjust focus every time when you click the zoom in/out button on the
Live View window or push the 5-Axis Button to zoom (see 3.2 5-Axis Button).
【Exposure Settings】This function can only be set up in the Advanced tab and can only be activated
when you select User Define from the Day Mode / Night Mode drop-down list (see 7.2.2 Profile). This
setting is used to adapt to the amount or type of light used by the camera. Click Apply to apply the
changes or Cancel to cancel the changes and return to the previous settings.
Mode: Select a mode from the drop-down list.
• Auto: Selecting Auto for the camera to automatically adjust the Shutter based on the
measured light level.
To Next Page
Loading...
