55
Fuel System
Notice:
Clean fuel is especially important in fuel in-
jected engines. The engine manufacturer’s
recommendations for fuel lter maintenance
must be followed exactly.
Notice:
The procedure to prime the fuel system on
outboard engines is specific to the type
and model of engines on your boat. You
should refer to engine manufacturer owner’s
manual for the priming procedure for your
engines.
TO REDUCE THE POSSIBILITY OF A FIRE OR EXPLOSION,
MAKE SURE ALL ELECTRICAL SWITCHES ARE IN THE “OFF”
POSITION BEFORE SERVICING THE FUEL SYSTEM.
DO NOT DRAIN ANY FUEL IN THE BILGE. THIS COULD LEAD
TO A FIRE OR EXPLOSION.
CHECK ALL FUEL LINE FITTINGS FOR LEAKS BEFORE AND
AFTER STARTING THE ENGINES FOLLOWING ANY FUEL
SYSTEM SERVICE.
To Next Page
Loading...
