3
Machine Parameters 41
EVERSYS AG CP89 Rue du Biais 19 CH-1957 Ardon
3 MACHINE PARAMETERS
1 Enter the menu “Machine Parameter”.
2 Scroll left and right on the scroll bar for large changes of the
parameter values.
3 Use the green arrows for fine tuning.
4 Use the white arrows to browse the menu up and down (appears
only if there are additional parameters e.g. for milk products).
5 Exit the menu with the back arrow.
PARAMETER DESCRIPTION
Coffee boiler temperature: After 3 minutes without selecting a
product, the heating will increase by the pre-defined value
(machine parameters range from 0 to 5°C).
Cold rinse quantity: This function automatically fills the boiler with
the default value of 1500 ml, when the machine / boiler is cold.
Warm rinse quantity: Informs about the water quantity used for
rinsing when the boiler is warm. If the temperature of the boiler is
above 55°C, a restart of the machine is necessary.
Ground drawer quantity: Sets the amount of coffee powder inside
the drawer before the machine asks for emptying the grounds
drawer.
Ground drawer out time: Informs about the minimal time the
grounds drawer has to be removed before automatic detection. The
default value is fixed as of 3 seconds.
To Next Page
Loading...
