3
Cleaning 37
EVERSYS AG CP89 Rue du Biais 19 CH-1957 Ardon
4 CLEANING
4.1 AUTOMATIC DAILY CLEANING PROCEDURE
The cleaning procedure has to be performed daily. The machine
requires a cleaning either at a fixed time or 24 hours after the last
cleaning, depending on the setting of the machine.
The function of the machine is stopped until the cleaning procedure
has been completed.
1 Empty and clean the grounds drawer. The machine detects if the
grounds drawer is full and does not proceed to clean.
2 Make sure that there are sufficient cleaning balls in the dis-
penser. Ensure there are no broken cleaning balls in the new box
whilst filling the dispenser.
3 Push the rinse button for at least two seconds.
To Next Page
Loading...
