To Next PageTo Next Page
Need help?Do you have a question about the evertz TR-3200E and is the answer not in the manual?
General advice on usage, cleaning, ventilation, and environmental conditions.
Alerts regarding moisture, liquids, and grounding for electrical shock and fire risk.
Warnings about internal high voltages and proper disconnection procedures before servicing.
Cautions for qualified personnel on servicing and operational restrictions like flammable atmospheres.
Lists key features including tally inputs, outputs, and housing in a 1RU frame.
Details on grounding, connectors, and RFI shielding for electrical connections.
Description of input ports for reading tallies and connection guidance for mixer outputs.
Details on output ports for driving camera tally lamps and connection guidance.
Guide to check and set the correct voltage setting for the unit before inserting the power cord.
Guidance on troubleshooting blown fuses for +24v/+5v supplies and checking LEDs.
Steps to configure the device's IP address using WinSetup and a serial cable, including cable details.
States that router configuration is hard-coded and no external setup is required.
Details on input voltage levels, connectors, and lines.
Specifications for output contacts, resistance, rating, service life, and connectors.
Details the standard Ethernet interface for connection to MAGNUM-TALLY.
Specifies the control interface as MAGNUM-TALLY.
Lists supply voltage range and power consumption.
Provides physical dimensions, weight, operating temperature, and ventilation.
General advice on usage, cleaning, ventilation, and environmental conditions.
Alerts regarding moisture, liquids, and grounding for electrical shock and fire risk.
Warnings about internal high voltages and proper disconnection procedures before servicing.
Cautions for qualified personnel on servicing and operational restrictions like flammable atmospheres.
Lists key features including tally inputs, outputs, and housing in a 1RU frame.
Details on grounding, connectors, and RFI shielding for electrical connections.
Description of input ports for reading tallies and connection guidance for mixer outputs.
Details on output ports for driving camera tally lamps and connection guidance.
Guide to check and set the correct voltage setting for the unit before inserting the power cord.
Guidance on troubleshooting blown fuses for +24v/+5v supplies and checking LEDs.
Steps to configure the device's IP address using WinSetup and a serial cable, including cable details.
States that router configuration is hard-coded and no external setup is required.
Details on input voltage levels, connectors, and lines.
Specifications for output contacts, resistance, rating, service life, and connectors.
Details the standard Ethernet interface for connection to MAGNUM-TALLY.
Specifies the control interface as MAGNUM-TALLY.
Lists supply voltage range and power consumption.
Provides physical dimensions, weight, operating temperature, and ventilation.
Inputs| logic low input voltage | < 0.8V |
|---|---|
| logic high input voltage | 3.5V or open circuit |
| input connectors | D25 female, four for inputs, each with 16 lines |
Outputs| contact resistance | 1Ω max. |
|---|---|
| operate/release time | 10ms max. |
| contact rating | 0.5A @ 24V DC resistive load, 0.15A @ 100V rms. AC |
Power| power supply | 100-240V, 50/60Hz |
|---|---|
| power consumption | 15W |
| service life | 1.0x106 at low load, 0.5x106 at full load |
Operating Environment| operating temperature | 0-40°C |
|---|---|
| ventilation | natural convection |
Weight and Dimensions| height | 1RU, 44mm (1.75” nom.) |
|---|---|
| width | 19” rack mount |
| depth | 11” (280mm) |
| weight | 2.5kg |
