Appendix A. POST Codes for the EVGA
P55 LE Motherboard
This section provides the AMI POST Codes (Table 6)
for the EVGA P55 LE Motherboard during system
boot up.
The POST Codes are displayed on the Debug LED
readout located directly onboard the motherboard.
This Debug LED will also display current CPU
temperatures after the system has fully booted
into the Operating System.
Table 6. AMI POST Code
Check Battery Power and CMOS
Initialize interrupt controlling hardware/vector table
Fixes CPU POST interface calling pointer
Primary initialization of CPU
Secondary initialization of CPU
Set up boot strap processor information
Set up boot strap processor for POST
Enumerate and set up application processors
Re-enable cache for boot strap processor
Early CPU initialization exit
Initialize keyboard controller
Early POST initialization of chipset registers
Debug LED with CPU
Temperature Monitor
To Next Page
Loading...
