48
ENGINE OPERATION
6
E type
■
Setting shallow water drive
①
Stop the engine.
②
Shift the outboard into forward.
③
Tilt the outboard up to one of the
shallow water drive positions.
■
Releasing shallow water drive
①
Stop the engine.
②
Tilt the outboard up to the tilt re-
lease position.
③
Gently lower the outboard.
Note
For U.S.A. market only
High altitude :
When engine operates at high altitude engine may need to have a high altitude kit installed.
Otherwise, operating the engine at high altitude may increase its emissions and decrease
fuel efficiency and performance. Please see "Product Warranty Information" for more detail.
!
Do not tilt up or down outboard motor
when swimmer(s) or passenger is near
to prevent them from being caught be-
tween outboard motor body and clamp
bracket in case the outboard motor
body falls.
!
When tilting up outboard motor with fuel
joint for over a few minutes, be sure to
disconnect fuel hose or close fuel cock,
or fuel may leak, potentially catching fire.
Do not tilt up outboard motor while
engine operates, or no cooling water
may be fed, leading to engine seizure
due to overheating.
!
Tilt
release
position
Shallow
water
drive
position
OM_E_10HP_body_111213.indd 48 11/12/13 13:23
To Next Page
Loading...
