48 - Maintenance
ANTI-CORROSION ANODES
Your motor is equipped with one or more anodes
that protect it from galvanic corrosion. Refer to Fea-
tures section for anode location. Disintegration of
the anode is normal and indicates it is working.
Check each anode periodically. Replace anodes
smaller than 2/3 their original size. See your Dealer
for replacements.
Galvanic corrosion destroys underwater metal
parts and can occur in fresh or salt water; however,
salt, brackish and polluted waters will accelerate
corrosion.
Metal-based antifouling paint on the boat or motor
and the use of improperly installed shore power in
the area of your moored boat will also accelerate
corrosion.
IMPORTANT: NEVER paint the anode, its fasten-
ers, or its mounting surface. Painting will reduce its
corrosion protection.
To Next Page
Loading...
