EVIQO EVIPOWER - What is the Delayed Start function, and how does it differ from the Schedule?; How do I track my estimated costs?; What is a dip switch and where is it located?; I can set the amperage on the dip switch and in the EVIQO app. Whats the difference?

USER MANUAL
7. What is the Delayed Start function, and how does it differ from the
Schedule?
Delayed Start is a one-time start time reservation. Once the start time is reached,
the Delayed Start feature automatically turns off. If you prefer a standardized
charging routine to benefit from regular off-peak rates, use the Schedules feature.
Please avoid setting a Delayed Start that conflicts with the existing Schedules.
8. How do I track my estimated costs?
To monitor your estimated costs effectively, set your electricity rates:
1. Tap the "..." icon located in the top right corner of the main page.
2. Choose the Settings menu and select the Electricity Plans.
3. Establish your basic plan and any additional Plans (you can rename them).
9. What is a dip switch and where is it located?
Dip switch is a hardware maximum current output limiter. By default it’s set for
40A (number “2” on the dip switch) in the plug-in version and 48A (number “3”) for
the hardwire version. You can adjust the default amperage to 16A or 32A (number
“0” and “1” on the dip switch, respectively), subject to the circuit capacity and/or
personal preferences. Follow these steps to access the dip switch:
1. Remove EVIPOWER from the wall bracket, by unscrewing the anti-theft screws
on both sides of the device with the allen wrench provided in the box.
2. Remove the face part by unscrewing the 7 screws on the back side.
3. Locate the amperage dip switch on the motherboard located on the internal
side of the face part of EVIPOWER, positioned in the top left corner. It’s gray,
small, and with a round shape.
10. I can set the amperage on the dip switch and in the EVIQO app.
What's the difference?
Dip switch is a hardware maximum current output limiter. The current slider
located on the main page of the EVIQO app is limited with the output set on the
dip switch. The slider has 1A increment.
11. My family members also use my EV. How to add a second user to
the EVIQO app?
To add a new user, simply follow these steps:
1. Tap on the man icon in the top left corner of the main page.
2. Press Household -> Members -> Add member (located in the top right corner).
3. Choose the role for the new member, and tap the top right corner to confirm the
invitation. The invited user will get an invitation email with instructions.
eviqo.io 6