Preface
Due to continuous produvct improvement, this manual is be subject to change without prior
notice.
When installing the hot water cylinder, please follow the Instructions as documented in this
manual.
A maintenance programme must be carried out as recommended in this manual to ensure
ongoing reliability.
Failure to comply with these recommendations could void the warranty and cause injury or
death.
It is important that the installation and operational instructions laid out in this manual are
strictly adhered to.
Evo Industries Australia Pty Ltd will not be held responsible for any damages or injuries
caused by the incorrect Installation of this hot water system.
This manual includes all the necessary information regarding the Installation, operation
and maintenance of this product. Please take the time to read it through before installing or
operating the heat pump.
Once the Installation is complete, check that all connections are secure before the power is turned
on.
The installer is to explain to the end user how to operate and maintain the unit in accordance with
this Instruction manual.
Contents
Contents
1. Safety Precautions
1
2. Specifications
3
2.1) Appearance
3
2.2) Characteristics
3
2.3) Operational Principle
4
2.4) Dimensions
5
2.5) Technical Data
6
3. System Features
7
4. Installation
8
4.1) Pipeline connection sketch
8
4.2) Handling and transportation
9
4.3) Installation clearances
10
4.4) Cable connection
13
4.5) Trial running
13
5. Operation
14
5.1) Function of wire controller
14
5.2) Controller Operation
16
6. Maintenance and repair
27
7.1) Unit parameters
28
7. Appendix
28
6.2) Troubleshooting guide
27
6.1) Maintenance
27
7.2) PCB Description
28
7.3) Detailed parts overview
29
7.4) Caution
31
7.5) Earthing methodology
32
32
7.6) Use of the P&T valve
33
7.7) Use of the overheating protector
Warranty
34
33
7.8) Draining the water tank
To Next Page
Loading...
