15
RReemmoovvee tthhee ppeerrssoonnaalliizzeedd ccaarrddss
Once the personalization cycle is completed, the card is delivered in the hopper located on the left
side of the unit.
The printer is fitted with an output hopper with a capacity for 100 cards (Dualys) or 50 cards (Pebble)
in 0.76 mm (30 mil) format. This is intended to receive the printed and/or encoded cards.
Locate the output
hopper and rotate it
(Dualys only)
Dualys: the hopper should be completly rotaded until it clicks. The “Cover open”
LED will blink when the hopper stands in middle position.
To Next Page
Loading...
