Evolis Pebble 4 User Manual

TThhaannkkss ffoorr cchhoooossiinngg aann
EEvvoolliiss CCaarrdd PPrriinntteerr ttoo
ppeerrssoonnaalliizzee yyoouurr bbaaddggeess
Using the latest printing and encoding technologies, Evolis
Pebble and Dualys offer their users both performance and
quality.
Evolis printers, fully adapted to both small and mid-
volume runs, combine simplicity of use and functional
richness: high quality printing, magnetic encoding, enco-
ding of both contact and contactless smart cards.
The ‘Evolis Genuine Product’ line of consumables linked to
the printer was specifically developed and optimized to
guarantee the highest quality of printing.
Using these consumables increases the life span of your
badges and of your Evolis printer.
As for all Evolis products, particular care has been used in
writing this manual. But if an error has still managed to slip
into these pages without our wanting it, please let us know
by sending an e-mail to info@evolis.com. Evolis will then do
everything in its power to correct the problem and give you
complete satisfaction.

Evolis Pebble 4 Specifications

General

Print Resolution	300 dpi
Print Speed (YMCKO)	150 cards/hour
Print Speed (Monochrome)	1000 cards/hour
Card Capacity (Input)	100 cards (0.76 mm - 30 mil)
Card Capacity (Output)	50 cards (0.76 mm - 30 mil)
Memory	16 MB RAM
Print Technology	Dye Sublimation/Resin Thermal Transfer
Card Thickness	0.25 to 1.0 mm (10 to 40 mil)
Card Types	PVC, Composite PVC, PET, ABS, Special varnished
Connectivity	USB
Encoding Options	Magnetic stripe
Operating System Compatibility	Windows, Mac OS X, Linux
Power Supply	100-240 V AC, 50/60 Hz