Evolis Pebble 4 User Manual

11
Install the Evolis printer
Technology and benefits ...........................................06
Initial approach
......................................................07
Install your printer
..................................................09
Check the components shipped
Connect the cables
Printer Control panel ...............................................11
Stand by ...............................................................11
Install the ribbons
...................................................12
Monochrome or color ribbon
Install the cards .....................................................13
Types of cards
Placement in the feeder
Adjustment of thickness
Remove the personalized cards..................................15
22
Setting of parameters
Windows print driver ...............................................17
Installation of the print driver
Properties of the driver
Card printing configuration in
an office automation application
33
Error messages and diagnostics
Notification of messages...........................................25
LED indicator
Port Monitor
Interpretation of messages .......................................26
Status messages
Alert messages
Error messages
Diagnostics assistance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Print and interpret a test card
Identify the software versions installed
Contents

Evolis Pebble 4 Specifications

General

Print Resolution	300 dpi
Print Speed (YMCKO)	150 cards/hour
Print Speed (Monochrome)	1000 cards/hour
Card Capacity (Input)	100 cards (0.76 mm - 30 mil)
Card Capacity (Output)	50 cards (0.76 mm - 30 mil)
Memory	16 MB RAM
Print Technology	Dye Sublimation/Resin Thermal Transfer
Card Thickness	0.25 to 1.0 mm (10 to 40 mil)
Card Types	PVC, Composite PVC, PET, ABS, Special varnished
Connectivity	USB
Encoding Options	Magnetic stripe
Operating System Compatibility	Windows, Mac OS X, Linux
Power Supply	100-240 V AC, 50/60 Hz