1. Note the code indicated
on the white ticket affixed
t
o the print head. Y
ou
will be asked for this
code in Step 3.
2. Pick up the new
print head and
turn it t
o
war
d
you, with the
white connector
visible.
3. Connect the cable into its
seat, making sur
e it is in
the c
orrect direction. Do
not f
orce the mechanism,
as this part is relatively
sensitive.
4. T
urn the head so
that the notice is
visible: the
connector is no
longer visible.
35
T
o complete the exchange of the print head, proceed as follows:
Before changing a print head, make sure to disconnect the printer from its power supply.
Step 1 - Removing the defective print head
Step 2 - Installing the new print head
7. The head is put back in place.
1. Open the cover and locate the
print head.
2. Press down on the metal piece at
the bottom as indicated
in order to release the lugs of the
holding forks, then
pull the lugs out from their seat .
3. Turn the head
carefully and
disconnect the
connector linked
to the cable
without forcing
the mechanism.
To Next Page
Loading...
