1. AFTER SERVICE
If there is any problem with the unit, please follow the steps below;
• Contact our company’s Support & Service Department immediately. After gathering the model name, Serial Number, date of purchase and description of the
problem, contact our company with information shown below.
• Try to solve the problem over the phone with the personnel of local service department. If the problem cannot be solved over the phone, return the unit directly to
service department.
• Our company or local distributor will make available on-request circuit diagrams, component part list, descriptions, calibration or other information which will assist your
appropriately qualified technical personnel to repair those parts of the unit which are designated by our company as repairable.
SERVICE
How to contact our company
EVOLT IoH Pty Ltd
1/24 Leda Drive, Burleigh Heads
Queensland, Australia 4220
Ph: +617 5535 6227
Email: info@evolt360.com
2. PACKING AND TRANSPORT
Our company wraps this device up with the most suitable method to protect it from any impact or damage during shipping and transporting. This device can be damaged
during delivery if it is packed in other ways except the one our company uses. Please handle this device carefully without any impact in packing and delivery. If this device
needs to be transported wrap this device up again and transport it as follows.
• Turn off the power.
• Turn off the power of the peripheral devices and disconnect all cables.
• Disassemble the device in reverse order of assembly.
• Pack the device with the original packing materials.
• Transport it carefully
33
To Next Page
Loading...