Evolution
©Evolution Controls Inc
14-June-2021
EVO/
TM
ECM-ACU-PRO . CONTROLS INC. EVO/
TM
Configurator
EVO/
TM
Configurator User Guide V3.0 Evolution Controls Inc. Page 6 of 26
The information in this document is confidential and must not be disclosed to any third party without the written consent of Evolution
Controls Inc.
PRO Product Selection
EVO/Configurator manages the configurations of the EVO PRO series which consists of three products:
ECM-4Spd, ECM-VCU and ECM-ACU. After the app is launched, double click to select ECM-ACU from the
PRO product list to work on the ECM-ACU control. The app saves the product type selection and
automatically starts with the previously selected product type next time when the app is launched.
To change the product type, simply exit the current product type that you are working with and then
double click to select a different product from the product list.
Note: When the app is installed in the Program Files (x86) folder, the product type selection is write
protected. It can only be changed when the app is run as an administrator. Otherwise, the message
below will pop up.
Follow the steps in Appendix A.2 to run the app as an administrator.
To Next Page
Loading...