Evolution R210 MTS - Table Saw Configuration and Components; Table Saw Configuration Diagram; Component Identification for Table Saw Mode

14
www.evolutionpowertools.com
R210MTS TABLE SAW CONFIGURATION
1. ON/OFF TRIGGER SWITCH (Inside handle)
2. ON/OFF LATCHING SWITCHES
3. CUTTING HANDLE
4. TABLE TOP
5. AUXILIARY LOWER BLADE GUARD
6. UPPER BLADE GUARD
7. RIP FENCE
8. PUSH STICK
9. MOUNTING HOLE (2 at the front and
2 under the stabilising arms)
10. CUTTING HEAD LATCHING PIN
(Not shown in this view)
10
7
2
3
1
5
9
8
6
4