Evolution S355MCS - Specifications; Cutting Capacity

6
www.evolutionpowertools.com
SPECIFICATIONS S355MCS
S355MCS-G2
S14MCS
MACHINE UK/EU/AUS USA UK/EU/AUS USA
Product code (UK) 220V-240V ~ 50Hz 102-0001 - 102-0001A -
Product code (UK) 110V ~ 50Hz 102-0002 - 102-0002A -
Product code (EU) 220V-240V ~ 50Hz 102-0003 - 102-0003A -
Product code (USA) 120V ~ 60Hz - 102-0004 - 102-0004A
Product code (AUS) 240V ~ 50Hz 102-0005 - 102-0005A -
Motor (UK/EU) 220V-240V ~ 50Hz 2200W - 2200W -
Motor (UK) 110V ~ 50Hz 1600W - 1600W -
Motor (USA) 120V ~ 60Hz - 15A - 15A
Motor (AUS) 240V ~ 50Hz 2200 W - 2200 W -
Speed (No Load) 1550 min
-1
1450 min
-1
1100 min
-1
1100 min
-1
Weight (With Blade) 32 kg 70.5 lb 32.9 kg 72.5 lb
Power Cord 3 m 10 ft 3 m 10 ft
CUTTING CAPACITY
Mild Steel Plate (Max. Thickness) 12 mm 1/2 ” 12 mm 1/2 ”
Stainless Steel Plate (Max. Thickness) 5 mm ◊ 13/64 ” ◊ 5 mm ◊ 13/64 ” ◊
Square Tube at 90˚ 120 x 120mm 4-3/4” x 4-3/4” 120 x 120mm 4-3/4” x 4-3/4”
Square Tube at 45˚ 100 x 100mm 3-29/32” x 3-29/32” 100 x 100mm 3-29/32” x 3-29/32”
Rectangle Tube at 90° 100 x 165mm 3-29/32” x 6-7/16” 100 x 165mm 3-29/32” x 6-7/16”
Rectangle Tube at 45° 100 x 110mm 3-29/32” x 4-3/8” 43 x 115mm 1-11/16” x 4 1/2”
Round Tube at 90° Ø 120mm Ø 4-11/16” Ø 120mm Ø 4-11/16”
Round Tube at 45° Ø 110mm Ø 4-5/16” Ø 100mm Ø 3-15/16”
Minimum Cut Off Piece Length 8 mm 5/16 ” 8 mm 5/16 ”
BLADE
Diameter 355mm 14” 355mm 14”
Bore 25.4mm 1” 25.4mm 1”
Kerf 2.4 mm .094” 2.4 mm .094”
Mild Steel Blade No. Teeth 66 80
NOISE EMISSION DATA*
Sound Pressure Level L
PA
110V: 94,9 dB(A) / 220-240V: 94,8 dB(A) 110V: 94,4 dB(A) / 220-240V: 95,8 dB(A)
Sound Power Level L
WA
110V: 107,9 dB(A) / 220-240V: 107,8 dB(A) 110V: 107,4 dB(A) / 220-240V: 108,8 dB(A)
Uncertainty, K
pA
& K
WA
3dB(A) 3dB(A)
◊ Stainless Steel blade must be fitted.
WARNING: Due to the power input of this product on start up, voltage drops may occur and this can influence other equipment
(e.g. dimming lights). So for technical reasons we advise, if the mains-impedance is Zmax< 0.069, these disturbances are not
expected. If you require further clarification, you may contact your local power supply authority.