Evolution Stealth 210 User Manual

(1.7)
VIBRATION
WARNING: When using this machine the
operator can be exposed to high levels of
vibration transmitted to the hand and arm. It
is possible that the operator could develop
“Vibration white finger disease” (Raynaud
syndrome). This condition can reduce the
sensitivity of the hand to temperature as well
as producing general numbness. Prolonged or
regular users of mitre saws should monitor the
condition of their hands and fingers closely.
If any of the symptoms become evident, seek
immediate medical advice.
a. The actual vibration level during use
will depend on the workpiece stability/
rigidity and the condition of the cutter
being used. These factors may increase the
vibration experienced by the operator. Each
individual application of the tool should be
assessed for the effect of these application
variable factors, before exposure.
b. The measurement and assessment of
human exposure to hand-transmitted
vibration in the workplace is given in:
BS EN ISO 5349-1:2001 and
BS EN ISO 5349-2:2002
c) The following factors can influence the
level of vibration. Reducing these factors will
help to reduce the eects of vibration:
Handling:
• Handlethemachinewithcare,allowing
the machine to do the work.
• Avoidusingexcessivephysicalefforton
any of the machines controls.
• Consideryoursecurityandstability,and
the orientation of the machine during use.
Workpiece:
• Considertheworksurfacematerial;
its condition, density, strength,
rigidity and orientation.
WARNING: The vibration emission during
actual use of the power tool can differ from the
declared total value depending on the ways
in which the tool is used. The need to identify
safety measures and to protect the operator
are based on an estimation of exposure in the
actual conditions of use (taking account of all
parts of the operating cycle, such as the times
the tool is switched off, when it is running idle,
in addition to trigger time).
(1.8)
SAFETY LABELS & SYMBOLS
WARNING:
Do not operate this machine if
warning and/or instruction labels are missing
or damaged. Contact Evolution Power Tools for
replacement labels.
Note: All or some of the following symbols
may appear in the manual or on the product.
Symbol Description
V
Volts
A
Amperes
Hz
Hertz
Min
-1 (RPM)
Speed
~
Alternating Current
n
o
No Load Speed
Wear Safety Goggles
Wear Ear Protection
Do Not Touch,
Keep hands away
Wear Dust Protection
CE certication
Waste electrical and
electronic equipment
Read Manual
WARNING
Laser Warning
Double Insulation Protection
CSA certication
7
www.evolutionpowertools.com
EN
FR
DE
NL
IT
JP

Evolution Stealth 210 Specifications

General

Brand	Evolution
Model	Stealth 210
Category	Saw
Language	English