User’s Manual
46
Sensitivity: Set the motion sensitivity for daytime and nighttime independently. The higher the
number is, the more sensitive it is.
Minimum Blocks for Detection: Adjust the minimum number of detection blocks that must be
activated in order to be considered as a motion event for daytime and nighttime independently.
Motion Zone: Click the Setup… button and a motion detection zone setup screen appears. Define
the area (max. four) of the image that you want to set up a motion detection zone by using the
motion detection zone icons.
−
(Select) or (Clear): Click to select or clear a block for motion detection. You can select
or clear the several blocks of an area using the mouse dragging.
−
or
(One or All block): Click to select or clear one or all blocks at a time.
−
(Area): Click to select or clear several blocks of an area.
Motion Ignoring Interval: Select the motion ignoring dwell time from the drop-down list. The
camera will not log or send notifications of motion events occurring during the preset interval
after a motion is detected. You can control excessive event logging and remote notifications
of motion detection events by adjusting the motion ignoring dwell intervals.
Daytime: Set up the daytime range. The camera will consider the remaining time range as the
nighttime.
Event Action: Check the box for each action the camera is to take when it detects a motion
detection event.
− Alarm Out: Check the box to trigger an alarm-output signal.
− Send Email: Check the box to send an email. Selecting Image Attachment attaches an event
detected image file (.JPG) to the email.
− Remote Callback: Check the box and select the remote systems to send a message (Not
supported for the WebGuard program).
− Audio Alarm: Check the box and select the audio file (.wav) to sound.
− FTP Upload: Check the box to upload images to an ftp server.
− Record: Check the box to record video
.
NOTE: You must properly configure the settings related to each event action when setting them
up to enable event actions. Refer to the Event Action setup.
To Next Page
Loading...
