• to detect if the Xeebra system has been set up properly, and to see if there are no issues preventing
the system from functioning.
• to shut down the Xeebra Client application of all Xeebra client workstations, and this from any client
workstation in the same network.
• to shut down all client workstations and servers in the network in a safe and timely manner.
For more information about how to install, set up and use the Support & HealthCheck tool, see the
Xeebra Support Tool application note.
INSTALLATION AND CONFIGURATION MANUAL
Xeebra |6. Monitoring and Support| 53
To Next Page
Loading...