Rear bulbs - To remove either the dual filament brake light bulb, or the single filament rear turn signal
bulb, removing the rear tires may be necessary.
The sockets for the bulbs are housed in the taillight assembly with a twist type catch. Twist to remove
the taillight or turn signal socket and replace the bulb.
Front Bulbs - There are bulbs in the front headlight assembly,
speedometer display, and lower front turn signal areas. To
replace the speedometer or headlight bulbs, start by removing
the front headlight body panel.
The headlight bulb is screwed into the headlight bulb via two (2)
#1 Philips head screws. Remove the screws and replace the bulb
in the twist style socket.
To remove the lower turn signal bulbs, start by
removing the front sliding plate. Once removed, turn
the installed bulbs wiring with socket out of the light
assembly, and pull the old bulb out, and push the new
one in
To Next Page
