OmniCure® SC- Series
UV Curing Solutions
www.excelitas.com/omnicure
Excelitas Canada Inc. 2021
All rights reserved
035-xxxxxR, rev.1
035-00539R rev 2
035-xxxxxR, rev.1
1
035-00539R rev 5
1 Introduction
The OmniCure ® SC0750/SC1000/SC2000/SC3000 System Controllers are designed to be used specifically
with OmniCure ® AC-Series UV LED systems. Designed to fit in a 1U rack, these System Controllers provide a
compact solution for powering up to two AC-series products simultaneously. Operating over a universal input
AC voltage range from a standard receptacle allows easy and quick installation without the need for
dedicated electrical resources. The rear-mounted integrated electrical circuit breaker provides electrical fault
protection and isolation while a front-mounted on/off switch and power indicator provides users with a
simple, easy-to-access means of powering AC-series products on a day-to-day basis.
OmniCure® has combined next generation optical engineering, state-of-the art electronics and fibre-optics
to produce sophisticated technologies that employ light. Today, OmniCure® is a leading developer of light-
based systems for sectors ranging from manufacturing to bio-medical, and is unmatched in itscommitment
to quality and service.
This manual covers the following models:
SC0750 019-00199R
SC1000 019-00186R
SC2000 019-00211R
SC3000 019-00213R
Excelitas Technologies recommends reading this guide to discover all features of the OmniCure®
SC0750/SC1000/SC2000/SC3000 System Controllers, and how to use them.
To Next Page
Loading...
Need help?
General
