Excelitas Technologies OmniCure SC0750 - Getting Started; Packaging Contents

OmniCure® SC- Series
UV Curing Solutions
www.excelitas.com/omnicure
Excelitas Canada Inc. 2021
All rights reserved
035-xxxxxR, rev.1
035-00539R rev 2
035-xxxxxR, rev.1
3
035-00539R rev 5
3 Getting Started
3.1 Packaging Contents
The package contains:
 One of the following System Controllers:
 SC0750 019-00199R
 SC1000 019-00186R
 SC2000 019-00211R
 SC3000 019-00213R
 AC power cable, selected for mains power receptacles in the destination country
 A small polythene bag containing mounting brackets (x2)
 Documentation CD
 Depending on the exact order, the package may also contain a DC power cable.
Carefully remove the contents and store the packaging materials for future use.
In addition to the System Controller enclosed, a functional UV curing setup will require:
 At least 1 DC power cable (for example, 018-00559R or 018-00595R – 5m power cable)
 At least 1 AC-series UV LED Head.
Before installation, ensure that the total DC electrical load does not exceed
approximately 85% of the rating of the SC-series unit to be installed.