Excell 150 Series User Manual

BH3 Series (02024013) ZSME300000289
12
EXCELL PRECISION CO., LTD.
2-3-1 Weighing Mode
Ⅰ. Units Selection
Press the key to select the desired weighing unit.
 There are 13 units available: g, ct, lb, oz, dr, GN, ozt, dwt, MM, tl.J, tl.T, tl.H and t.
Ⅱ. Display Mode/Resolution Selection
Non-approval models: Press the key to shift between Display Unit Weight Mode and
Display pcs Mode.
Approval models: Press the key to shift weighing resolution between normal resolution and
high resolution.
Ⅲ. Tare Function
1. Place the container on the platter. After stable, press the
T
key to deduct the container
weight. The display returns to zero and the tare indicator
T
is on.
2. Place the object into the container, and the net weight of the object is displayed.
3. Remove the container and the object from the platter, and the negative value of the container
weight is displayed. Press the
T
key again to re-zero and the tare indicator is off.
 The balance can be tared continuously up to its full capacity.
 If the tare indicator
T
is still on, after pressing the
T
key to exit the tare mode.
Please press the key to zero the balance, and the tare indicator
T
will go off.
 For Sri Lanka approval model(s), you can only tare once.
UNITS

UNIT
WT
→0←
ON

HR

Excell 150 Series Specifications

General

Brand	Excell
Model	150 Series
Category	Scales
Language	English